# $Id: lucent-mt-10,v 1.6 2007/10/03 23:52:11 faxguy Exp $

#
# prototype config for MultiTech 5634-series modems using
# the Lucent/Agere chipset supporting V.34-Fax.
#

#
CountryCode:		1
AreaCode:		314
FAXNumber:		+866.542.7647
LongDistancePrefix:	1
InternationalPrefix:	011
DialStringRules:	etc/dialrules
ServerTracing:		1
SessionTracing:		0xFFF
RecvFileMode:		0644
LogFileMode:		0600
DeviceMode:		0600
RingsBeforeAnswer:	1
SpeakerVolume:		off
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	"Maple Park Development Corp"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%P of %%T"
MaxRecvPages:		50
#

ModemType:		Class1.0	# use this to supply a hint
ModemRate:		57600		# must be at least as fast as the DCE-DCE communication
ModemFlowControl:	rtscts		# many firmwares have broken software flow control
ModemSetupDTRCmd:	AT&D3		# hang up and reset on DTR drop
Class1EnableV34Cmd:	AT+F34=14,1,2	# 33600-2400 primary, 2400-1200 control
Class1TMConnectDelay:	400		# counteract quick CONNECT response
Class1HasRHConnectBug:	yes		# cope with +FRH=3 CONNECT errors

# If your line supports Caller-ID, you may want to uncomment this...
# ModemResetCmds:	AT+VCID=1
# CallIDPattern:	"NMBR="
# CallIDPattern:	"NAME="

# Or with the MT5634ZBA-DID you'll probably need something like...
# ModemReadyCmds:	AT*DS1*DD0*DF1*DN4	# enable DTMF-DID, wink-start, 4 digits
# CallIDPattern:	"DTMF"		# format of AT*DF1
# CallIDAnswerLength:	4		# four DTMF-DID digits then ATA
# ModemResetCmds:	AT*DP1		# to reverse the polarity